Jet self-priming pump to transport clean water

ApplicationIt can be used to transfer clean water or other liquids similar to water in physical and chemical properties.It is suitable for lifting water from the well,sprinkling irrigation in garden,pressure boosting of running water or supporting equipment,etc.PumpCast iron pump body and support under special antirust treatment

Featured Products

Application
It can be used to transfer clean water or other liquids similar to water in physical and chemical properties.It is suitable for lifting water from the well,sprinkling irrigation in garden,pressure boosting of running water or supporting equipment,etc.

Pump
Cast iron pump body and support under special antirust treatment
Brass impeller(stainless steel or PPO)
AISI 304 shaft
Max.liquid temperature:+40ºC
Max.suction:+8m
Self-priming

Motor
C&U bearing
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class:F
Protection class:IP44
Max.ambient temperature:+40ºC
NO.MODELPOWERINLET/OUTLETMAX.
FLOW
MAX.
HEAD
MAX.
SUCT
KWHP(L/MIN)(M)(M)
AJET-60S0.450.61''X1''40408
BJET-80S0.60.81''X1''45458
CJET-100S0.7511''X1''50508

Jet Self-Priming Water Pump for Transfer Clean WaterMaterials Table
No.PartMaterial
1Pump BodyHT200
2NozzlePPO
3VenturiPPO
4DiffusePPO
5ImpellerBrass
6Mechanical SealCarbon/Ceramic
7SupportHT200
8Shaft And Rotor 
9Ball Bearing 
10Stator 
11Motor CaseAluminum
12Motor CoverCast iron
13Fan PP
14Fan Cover 
15Capacitor Holding Box 
16Capacitor 
17Terminal Cover 


Jet Self-Priming Water Pump for Transfer Clean Water


Jet Self-Priming Water Pump for Transfer Clean Water

Jet Self-Priming Water Pump for Transfer Clean Water

Jet Self-Priming Water Pump for Transfer Clean Water


Jet Self-Priming Water Pump for Transfer Clean Water

FAQ:
 
Q: What is the delivery time?
A:The sample can be sent to customer within 10-15 days.
The batch order can be shipped within 35 days after receiving deposit payment.

Q: Is it all right to make customer's own brand name?
 A: Can make OEM if order quantity reached 1000pcs totally.

Q: What is your payment term?
A: 30% in advance, 70% balance the B/L or T/T.

Q: What is the warranty of the product?
A: We offer 1 year product life guarantee and a generous 1 year warranty on all purchases that begin with the BL.

Q: Packing method?
A: Craft box or color box if quantity reaches to 1000pcs.

Q: What information shall I provide you when I need your offer?
A: Normally, we need customer to supply the pump flow, total head, pump material (copper wire or aluminum wire? Stator length), voltage, frequency, etc, so we can quote exactly what customer need.

Q: Can you accept customized products?
A: Yes we accept your specific order if you could provide us with your requirements.

Q: Will you supply any spare parts with the pumps?
A: Yes, we can supply for example: tank, flexible hose, pressure switch, pressure gauge, brass connector, cable, etc.

Q: Is there any leakage problem of this pump?
A: Some factory may have such problem, but we solved it very well, by using good material of pump casing, O-ring, and they fit each other perfect. We use 8 screw on the pump head while others may use only 6 screw to save cost. We test 100% and long time for the pump head part, to make sure there is no leakage problem.

Q: How many pcs can load into one 20ft container
A: 1200pcs

Q: Do you supply sample?
A: We can supply sample, but customer have to pay for the sample fee.

Q: Where did you export to?
A: We export to more than 50 countries, for example, Israel, South Africa, Germany, Poland, Spain, Vietnam, Malaysia, Russia, Thailand, Mexico, Brazil, Chile, etc.

Q: Is it all right to make customer's own brand name?
A: Can make OEM if order quantity reached 1000pcs totally

Q: Can I get any discount if order EDWIN PUMP brand?
A: At the moment, customer can get lower offer if they purchase EDWIN PUMP brand but still get same good quality pumps as always.

Q: Can I order some pressure tank, flexible hose, 5-way connector, pressure gauge, pressure controller and assemble with the pump?
A: Yes, many customer purchase by this way, and we can make very good job to have this booster system to be assembled without any problem.

Q: Can the pump be made by customized voltage and frequency
A: Yes, 220-240V, 110V, 50Hz, 60Hz, we can make according to customer's need
 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours